ACRYLIC VARNISH FOR STONE NEOMID
Professional quality
in each product!
+7 812 458-59-90
EN
ACRYLIC VARNISH FOR STONE NEOMID

ACRYLIC VARNISH FOR STONE NEOMID

State Registration Certificate RU.78.01.06.008.E.005872.09.11 dd. 15.09.2011

PURPOSE:

Acrylic varnish with wet stone look for protective and decorative varnishing of brick and stone surfaces. Suitable for interior and exterior (under a shed) use.

PROPERTIES:

  • Creates a firm clear satin film.
  • Increases weathering and moisture resistance of treated surfaces.
  • Protect from atmospheric precipitation.
  • Prevents mold growth and salty appearance.
  • Retains protective and decorative properties for a long time.
  • Quick dry.
  • Environmentally friendly.
  • Practically no odor.
  • Water borne.

Inside/outside
Mold/fungi protection
Dirt resistance
Dry by touch in 1 hour
EXAMPLES OF USE: Use for varnishing brick, artificial and natural trim stone, concrete, roof tile, limestone.
WARNING! Do not use for varnishing horizontal surfaces exposed to abrasion and weather (sidewalks, pavements, playgrounds, etc.).

Show more

RECOMMENDATIONS: Perform all work at the ambient temperature and treated surface temperature above +10°C.

SURFACE PREPARATION:  Make sure the surface is dry and clean, free of fungi, dirt, resin and grease. In case of mold infestation, use mold remover NEOMID 600, efflorescence appearance – NEOMID 550.

APPLICATION: Ready to use. Stir thoroughly before use. Apply 1-2 coats with a brush and paint roller sparingly and evenly at a temperature above +10°С. If necessary, perform intermediate sanding. Avoid drips and sagging. Due to wide variety of surfaces of mineral substrates, the varnish may behave differently on various surfaces. It is good practice to do a test patch on a small area before varnishing.

DRYING TIME: Tack-free – up to 1 hour at +20°С and relative humidity of 65%.
Apply successive coat 3 hours after the previous one. It is ready for use after 3 hours (protect the surface from atmospheric precipitation within this period).

CONSUMPTION FOR 1 COAT: 1 l/5-7 sq.m, depending on surface properties.


THINNING: Ready-to-use; if necessary, thin with water by 10%. Clean the tools with water.

DISPOSAL: Prevent product from entering soil, drains and surface waters. Dispose of tightly closed containers with residue according to Sanitary Regulations and Norms SanPin 2.1.7.1322-03.

SAFETY MEASURES: Warning! In case of contact with eyes, may cause irritation. Fire and explosion proof. Use protective goggles and gloves. Ventilate the room after handling. In case of contact with eyes and skin, rinse immediately with plenty of water. Do not breathe vapor.
If swallowed, seek medical advice immediately and show the label. Keep out of the reach of children.

STORAGE AND TRANSPORTATION: Do not freeze. Do not freeze. Store in the original tightly closed container at temperature of +5°С to +30°С. Keep away from sunlight. Keep away from heat source. Keep open containers tightly closed. Fire and explosion proof.

SHELF LIFE: 24 months.

COMPOSITION: Acrylic dispersion, defoamer, bioprotective and targeted additives, water.

Specification 2313-050-98536873-2010  
State Registration Certificate RU.78.01.06.008.E.005872.09.11 dd. 15.09.2011


hide
USE
outdoors/indoors
TOOLS
brush, paint roller, spray gun
APPLICATION TEMPERATURE
t>+10°C
NUMBER OF COATS
2–3
CONSUMPTION FOR 1 COAT
1 l for 5 – 7 m2
TOUCH DRY
1 h
SHEEN LEVEL
satin
COLOR
transparent
CLEANING UP
water
STORAGE TEMPERATURE
+5°C<t<+30°C
SHELF LIFE
24 months

State Registration Certificate No. RU.78.01.06.008.E.005872.09.11 dated 15.09.2011

Related Products

Neomid Benefits

Choice of Professionals
Famous brand
Innovative
Premium-quality products
Wide range of products
Up to 35 years warranty