HYDRAULIC INSULATING FIBER REINFORCED MASTIC NEOMID
Hydraulic insulating fiber reinforced mastic NEOMID is designed for creating uniform joint free water isolation inside humid and wet rooms as well as outside before tile laying: bathrooms, toilets, shower rooms, kitchens, laundries, basements, balconies, terraces, etc.
Due to fiber reinforced component the mastic creates extra-strong intermediate coat preventing water penetration. Hydraulic insulating coating possesses high-resistance to cracking, increased elasticity which allows applying the paint even on deformed surfaces (up to 15%).
Fiber reinforced mastic has stiff consistency for convenient application, it does not drip. Applying with a trowel is possible.
It is recommended to use the mastic before tile laying and plaster works as well as for ﬁlling joint gaps in exit points of water and gas pipes, angle joints of building structures and other spots requiring safe water isolation.
It is not intended for places constantly affected by considerable dynamic loads and high water pressure, e.g. swimming pools, wells and special tanks. It is not a ﬁnishing coating for spots that are subject to abrasion and/or insolation.
- good adhesion with mineral surfaces (concrete, plaster, brick, etc.), metal, wood, gypsum plasterboard;
- covers the cracks appearing due to wall shrinkage up to 2 mm;
- forms an elastic waterproof ﬁlm with high vapour permeability, which allows applying material to insufﬁciently dried surfaces;
- allows tile laying (with cement mortars or acryl-based or organic adhesives) on dried hydraulic mastic as well as applying of plaster and ﬁlling-up mortars;
- contains no solvents;
- no odor.
It is used for works on concrete, plaster, brick masonry, gypsum plasterboard, gypsum plaster, wood, plywood in humid premises and under facing tiles outdoors.
Composition: polymer slurry, filler, functional additives.